DDH Series (Damec Deep Hole) deep-hole honing machine adopts servo motor rotation – gear rack mechanical feed mode, the high precision of the servo motor resolution can be precisely controlled feeding. Pinion and rack self-locking function, on the other hand, can effectively repair the inner hole with accuracy so energy will be greatly reduced.
Adopt servo motor rotation – gear rack mechanical feed mode, the high precision of the servo motor resolution can be precisely controlled feeding. Pinion and rack self-locking function, on the other hand, can effectively repair the inner hole accuracy and energy consumption will be greatly reduced.
Siemens touch screen mode display can convenient man-machine interface operation. Display content not only has the menu of installation and operation under the states of manual and automatic , and can even show honing head pressure, time and stroke speed honing machine working condition. Spindle load table shows parts top and bottom of the inner hole so that the operator adjust honing parameters.
Spindle motor utilizes German original variable speed motor with friction plate , through the three transformation grade of a gear box, it is easy to adjust the spindle speed, spindle motor with brake function can eliminate the phenomenon of the hole wall scratched at the end of honing. Spindle box drag plate sliding device, can make the spindle box and honing tools easily from the hole after processing, It’s good for measuring processing workpieces and replacing honing tools.
Reciprocating motion motor adopts servo motors of the United States ,drive by chain link. You can adjust the length of Reciprocating motion , based on the length of workpiece. according to the situation of workpiece machining accuracy at the same time, to pause short stroke on both ends of the workpiece.
1. ID : STD ID :ft 25-450mrn, Customization to 1000mm.
2. Length : STD 2M, 3M,4M,6M,8M, Customization to 10000mm
1. Motor Power : 4.2KW, Stroke Speed : 1-40M/min
Siemens S7 Series PLC control system
1. Standard machine with V fixture
2. The maximum Clamping Diameter is 550mm
3. Chain Clamping
1. Motor Power: 5.SKW. Spindle Speed :10-350RPM
2. Three mechanical shifts and variable speed in friction
1. STD cooling tank Volume: 300L , filter by magnetic separator
2. Customized : optional DNO-A, Magnetic roller tape filter
1. Automatic stone feed. Multi-function load setting, including work load , safety load ,alarming load and no spark grinding load etc.
Technology Parameters:
| – | DDH-20 | DDH-30 | DDH-40 | DDH-60 | DDH-80 | DDH-100 |
|---|---|---|---|---|---|---|
| Max Stroke length(mm) | 2000 | 3000 | 4000 | 6000 | 8000 | 10000 |
| Ø Honing Range(mm) | 25-1000 | 25-1000 | 25-1000 | 25-1000 | 25-1000 | 25-1000 |
| Cooling Tank Volume(L) | 350 | 350 | 350 | 500 | 500 | 500 |
| Length of Machine(mm) | 6200 | 8200 | 10200 | 14700 | 18700 | 22700 |
| Width of Machine(mm) | 1200 | 1200 | 1200 | 1500 | 1500 | 1500 |
| Width of Machine(mm) | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 |
| Weight (kg) | 2200 | 2600 | 3000 | 4200 | 5000 | 5800 |